The Internet puts a dizzying amount of information at our fingertips and you can find numerous answers to the question- How to learn jewellery designing at home, with a quick online search. To make your work easier, we have gathered some information on jewellery design courses that can help you learn from home.
Let us now learn to make some jewellery designs with the help of jewellery making courses online India-
a) Crystal Tip Earrings
Create a timeless glamour through metallic-coated faceted glass beads by combining them with gold-filled wire and chain. You can use a fine curb chain that creates movement when worn and the facets that add sparkle for an impressive dressed-up look. If you are not able to find a curb chain, you can substitute it with a light cable chain.
Materials Needed
Beads:
- 12 x 8mm crystal teardrop beads, 2 in number
- 4 x 4mm Czech cube beads
- 2 x 6mm faceted Czech beads
- 2 headpins
- Round-nose pliers
- 26.5cm length of curb chain
- Sharp Wire cutters
- 12inch of 24 gauge gold-filled or gold-plated wire
- 2 jump rings
- A good pair of ear wires
i) Start by putting one teardrop bead onto each headpin. Go on to create an open loop with your round-nose pliers. Close the loop after attaching a 1cm piece of a curb chain to it.
ii) The next process requires you to create an open loop with a 5cm piece of wire and hook it onto the piece of chain above the teardrop. According to jewellery making courses online India, you are then asked to slide two cube beads onto this piece of wire thereby creating an open loop. Close the loop after hooking the wire onto a 1cm section of the chain.
iii) For the third step, cut a 7cm piece of wire and work an open loop on one end of the wire while sliding the beaded chain section onto this loop. Allow sliding a 3cm section of the chain on the short end of the loop to rest against the beaded section. Place a 2.5cm piece of chain next to this section. Now, slide a 2.5cm piece of chain on the long end of the wire, on the other side of the beaded section and place a 2cm piece of chain next to this. After closing the loop, make sure to slide on a faceted 6mm bead and attach a jump ring. Remember to attach the jump ring to an ear wire.
iv) To make the second earring, just repeat all the steps mentioned above.
Short Cuts
It can be tedious to cut small sections of wire and so, here is a way to make it a bit easier. According to online jewellery courses, begin by holding a straight pin horizontally with one hand and hanging the length of the chain from it. Further, hold a tape measure vertically next to the chain, grasping it with the same fingers that you are using to hold the pin. Lastly, use your free hand to cut the chain to the desired length with the help of wire cutters.
b) Peppermint Moss Bangles
Materials Needed:
- 2.5 x 8cm green felt pieces, 8 in number
- Iridescent green seed beads
- Iridescent green bugle beads
- Copper-coloured sparkly embroidery thread
- Beading thread
- Medium cotton cord
Tools Needed:
- Scissors
- Needle
- Beading needle
Instructions:
i) Start by binding the felt pieces into eight beads using embroidery thread.
ii) Further, you need to thread the felt beads onto the cord and knot the cord securely to form a bangle. Since this will help to give a fixed size to the bangle, it is important to ensure that the size is correct before continuing. If you feel the need to make the bangles larger, add a ninth felt bead.
iii) According to jewellery making courses online India, remember to carefully position the knot inside one of the felt beads.
iv) Go ahead and darn the ends of the felt beads together by doing stab stitches using embroidery thread. Be aware to lengthen the stitches so as to accommodate the outside curve of the bangle.
v) To decorate, stitch bugle beads over the join.
vi) Make sure to add a string of seed beads, twisting and turning it around the felt beads while anchoring it every now and then by stab stitching directly through the cord.
Forget-me-not
The peppermint moss bangle would make a perfect gift for your sister or mother. The team of cool blue and silver is a timeless combination.
c) Sweet Peanut Bracelet
source: SCMYK accessories
Materials Needed:
- 2.5 x 6cm tan felt pieces, 6 in number
- 6 yellow wooden spacer beads
- Gold/yellow seed beads
- Gold/yellow bugle beads
- Tan embroidery thread
- Beading thread
- Round elastic
Tools Required:
- Scissors
- Needle
- Beading needle
Instructions:
i) Begin the process of making this bracelet by binding the felt pieces into six beads using embroidery thread and attaching seed beads and bugle beads.
ii) According to online jewellery courses, you need to thread felt beads and spacer beads alternately onto the elastic.
iii) The third step involves tying a knot securely in the elastic, while keeping the elastic taut but not fully stretched.
iv) Carefully cut off the ends of the elastic close to the knot.
v) Lastly, pull the elastic gently through one of the felt beads, so that the knot lies invisibly within the bead.
Be inspired by the above-mentioned information on how to learn jewellery designing at home and adapt them to suit your own personal taste or style.
Also Read: Scope of Gold Jewellery Designing in India
At Hunar Online, you will get access to detailed video lessons and can learn from anywhere. You will get 24/7 faculty support and a chance to learn from the experts in the industry. You can also watch our trial classes and get a glimpse of our courses. You can start learning your favourite course by downloading the app.
So, what are you waiting for? Join Hunar Online Courses and do what you always wanted to do.
